User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 19
Regulation Disassembly
1. Remove Regulators
2. Remove Air Barb from base.
3. Remove regulator base retaining screw (1
each) from body.
4. Slide regulator base from body and remove
poppet spring.
5. Unscrew allen adjuster.
6. Unscrew end of high-pressure regulator
housing.
7. Remove regulator spring washer.
8. Remove regulator spring.
9. Remove piston.
10. Remove Pin Valve Retainer.
11. Remove Pin Valve.
12. Remove Teflon Washer.
13. Unscrew ASA end from adjustment end of
low-pressure regulator.
14. Remove Pin Valve Retainer.
15. Remove Pin Valve.
16. Remove Teflon Washer.
17. Remove piston.
18. Remove regulator spring.
19. Remove regulator spring washer.
20. Unscrew allen adjuster.