User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 16
DISASSEMBLY/ASSEMBLY
When disassembling the Intimidator always ensure the marker is de-gassed. The
disassembly portion of this manual will be divided into three sections.
q Trigger disassembly
q Regulator disassembly
q Body disassembly
When assembling the marker perform the respective assembly on reverse order as
disassembly.
Trigger Disassembly
1. Remove Trigger Assembly retaining screws
(2 each). Ensure screw with washer is
installed in front when assembling.
2. Pull Trigger Assembly down to expose
airlines.
3. Disconnect airlines from body (3 each).
Note: Use care when removing airlines.
Inspect after removal to ensure no
tears in hose took place during
removal.
4. Disconnect Eye Sensor Harnesses (2
each).
5. Remove grip.
6. Remove LCD Cover.
7. Remove 4 allen’s to split Trigger Halves.