User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 15
DIP Switch Settings
DIP Switch settings determine the default settings used by the marker upon power
up. These switches allow the user to customize the markers default settings. To
access the DIP switches, remove the right side grip. DIP switches are located at the
base of the Circuit Board. Reference Figure 2 for appropriate settings.
ON
OFF
1 2 3 4 5 6 7 8 9 10
Based on Version 1.4.3
Example above indicates marker will power up with the following settings:
q Firing Mode: Semi Auto
q Rate of Fire: 14 Shots/sec.
q Forward Dwell: 6 ms
q Ball in place delay: 1 ms
q Tournament Lock: Disengaged
1 through 3
Firing Mode
4 and 5
Rate of Fire
6 through 8
Forward Dwell
9
Ball in Place Delay
10
Tournament Lock
off,off
9 Shots/sec.
off,on
10.1 Shots/sec.
on,off
12 Shots/sec.
on,on
14 Shots/sec.
off,off,off
20 ms
off,off,on
18 ms
off,on,off
16 ms
off,on,on
14 ms
on,off,off
12 ms
on,off,on
10 ms
on,on,off
8 ms
on,on,on
6 ms
off,off,off
Semi Auto
off,off,on
3-Burst
off,on,off
6-Burst
off,on,on
Full Auto
on,off,off
Test
on,off,on
Turbo
on,on,off
Reactive
on,on,on
Unused
off
1 ms
on
Bypass Eye
off
Disengaged
on
Engaged
Figure 2. DIP Switch Settings