User's Manual

BOB LONG GZ INTIMIDATOR – PAGE 10
OPTIONAL EXPANSION ATTACHMENT
Remove O-Ring
from here Place
O-Ring here
Place 011 O-Ring
Here
ELECTRONICS
Battery Information
The Intimidator uses a standard 9v battery. To change the battery, remove the Grip.
Remove the 4 Allen’s securing the two grip halves. The battery fits into the bottom of
the grip frame. Disconnect the old battery and re-connect the new.
WARNING
At this time it is good to verify bolts are not protruding through
the bottom of the grip and into the interior components. Failure
to do this could result in damage to the battery or circuit board.
Anti Chop Eye
The Anti-Chop Eye is a pair of photo sensors in the bottom of the breach determining
when the paint ball is seated and ready fire. The EYE mode within the mode menu
can be set to determine how long the marker waits after seeing the ball before it will
fire. Factory recommended setting is 1ms. Refer to Figure 1 for available settings.