User Manual M00042AE12-US/ M00042AE19-US NECK & BACK MASSAGER
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 2. DO NOT reach for an appliance that has fallen into the water. Unplug immediately. 3. DO NOT use the massager while bathing or showering. 4.
WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2) DO NOT operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. 3) Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
WARNING 16) Temperatures sufficiently high to cause burns may occur regardless of the control setting. DO NOT use on an infant or invalid or on a sleeping or unconscious person.DO NOT use on insensitive skin or on a person with poor blood circulation. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering. 17) DO NOT Crush – Avoid sharp folds. 18) DO NOT use massager in close proximity to loose clothing or jewelry.
The symbol of an exclamation point within a triangle is intended to draw the user’s attention to important operating and maintenance/servicing instructions in the literature accompanying the unit. IMPORTANT: To reduce the risk of electric shock, this product has a polarized plug (one prong is wider than the other). For safety reasons, this plug will only fit into a polarized outlet the correct way. If the plug does not fit fully into the outlet, reverse the plug.
OPERATION INSTRUCTION 1. Connect the Power Adapter into the DC Power Port, then plug the Power Adapter into an electric outlet. 2. Grip the Positioning Handles and drape the unit around your neck with the Shiatsu Nodes at the center of your back. 3. Press the" "POWER ON/OFF Button. The massager will turn on. " the MASSAGE DIRECTION Button to change the 4. Press " massage direction. " the speed adjustment button to choose among 3 5. Press " massage speed levels (low / medium / high).
PRODUCT CARE AND MAINTENANCE 1. Place the massager in a safe, cool, and dry place when not in use. 2. After unplugging, wipe with a soft, damp cloth using non-abrasive cleaners. 3. Never submerge the unit in any liquid. 4. Keep away from all solvents and harsh detergents. DO NOT attempt to repair this massager. There are no user-serviceable parts. Do not wash Do not bleach Do not dry (used with do not wash) Do not iron SPECIFICATIONS Model: M00042AE12-US/ M00042AE19-US Input: 12V = 2.
TROUBLESHOOTING GUIDE PROBLEM The massager doesn't turn on Shuts off automatically CAUSE SOLUTION The power adapter plug is loose Reconnect the plug to the outlet Power is off Press the power button to turn on the massager No power Try a different power outlet The 15-minute timer The massager has a timer and will turn off on its own after 15 minutes. You can press the power button to start another 15-minute massage.
A Dedicated Team Just For You Every Bob and Brad product is backed by a 1-year warranty and an award-winning customer service team. If you are in any way dissatisfied with a product you ordered, we’ll exchange it, replace it or refund your money under the warranty. Simply email us the problem, and we’ll take care of it. Troubleshoot Product Knowledge Help you solve any issues with your device. Answer questions about your device and best practices.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Manufacturer Shenzhen Laige Technology Co. Ltd.