User Manual

USING THE SOUNDBAR
Plug in the power cable of the soundbar to an external power socket; the unit goes into
standby mode. Short press the Power Button on the remote or soundbar control panel to
turn on the soundbar.
Bluetooth: Press the Input button on the remote control to enter Bluetooth mode. Turn
on the Bluetooth functionality on your media device, search for “Aavante Bar Octave” and
select the same to establish pairing.
AUX: Use the provided 3.5mm AUX cable to connect external audio sources to the
soundbar. Press the Input button on the remote control to select AUX mode.
Please note, PREVIOUS and NEXT buttons don’t function under AUX mode.
HDMI(ARC): Use an HDMI cable to connect the soundbar to your HDMI(ARC) enabled
device. Press the Input button on the remote control to select HDMI(ARC) mode.
Please note, PREVIOUS and NEXT buttons don’t function under HDMI(ARC) mode.
OPTICAL: Use an Optical cable to connect the soundbar to your Optical device. Press the
Input button on the remote control to select OPT mode.
Please note, PREVIOUS and NEXT buttons don’t function under Optical mode.
USB: Insert your USB drive into the USB port on the soundbar. The soundbar goes
automatically under USB mode. You can also press the Input button on the remote
control to switch to USB mode.
AC POWER
Notes:
• Make sure the power supply is correct and never handle the power cord or its plug with
wet hands when plugging into or unplugging from an outlet.
• Ensure the main power switch is in OFF state before connecting the power cord to the
power supply to avoid damage to the unit.
• A damaged power cord can easily cause an electric shock or fire hazard, never use a
power cord after it has gotten damaged.