USER MANUAL AAVANTE BAR OCTAVE
USER MANUAL Thank you for choosing the boAt Aavante Bar Octave as the audio source for your home. Discover a new level of immersive, cinematic audio experience at home with the boat Aavante Bar Octave. With a powerful 100W RMS total output, this sound bar brings every aspect of your entertainment be it a song, show or movie to life. The 2.2 channel sound system provides a balanced sound for your movies, music and even video games and you can experience cinematic sound that revolves around you.
SAFETY & WARNINGS Caution To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. The unit has no user-serviceable parts inside. Refer servicing to qualified personnel only The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
12. Do not place this unit in a damp area as the moisture will affect the life of electric components. 13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth. 14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord. 15.
SOUNDBAR CONTROL PANEL & PORTS 1. Power Button: Short press for standby ON/OFF. 2. Input Button: Short press in steps to choose among USB, AUX, Bluetooth, Optical and HDMI(ARC) modes 3. Play/Pause Button: Short press to play/pause whereas long press to disconnect the Bluetooth connection 4. Previous/Vol+: In USB/BT mode, short press to return to previous track; long press to increase volume In Optical/HDMI(ARC)/ AUX Mode, long or short press to increase volume 5.
REMOTE CONTROL 1. Power Button: Standby mode for Power ON/OFF Note: The soundbar automatically switches to standby mode when there is no input for 30 minutes 2. Mute: Mute ON/OFF 3. Pair: Connect or disconnect Bluetooth; long press the button to disconnect or reconnect to Bluetooth 4. INPUT: Short press to switch among input modes, BT; OPT; HDMI(ARC); USB and AUX 5. Volume+/- : Increase or decrease the volume 6.
REMOTE BATTERY INSTALLATION 1. Open the battery panel 2. Insert 2 batteries without polarity reversed 3. Close the battery panel 4. Keep the remote control within 8m-10m of the soundbar unit Note: Remove the batteries when the unit is not being used for a long period of time.
USING THE SOUNDBAR Plug in the power cable of the soundbar to an external power socket; the unit goes into standby mode. Short press the Power Button on the remote or soundbar control panel to turn on the soundbar. Bluetooth: Press the Input button on the remote control to enter Bluetooth mode. Turn on the Bluetooth functionality on your media device, search for “Aavante Bar Octave” and select the same to establish pairing. AUX: Use the provided 3.
TECHNICAL SPECIFICATIONS Model boAt AAVANTE BAR Octave Technology Optical, HDMI(ARC), Bluetooth v5.0, AUX, USB Drivers 2"*4 SB + 3"*2 SW Output Power 100W R.M.S. Frequency Response 55Hz-20KHz Signal-to-Noise Ratio ≥ 70dB Impedance 4Ω*4+8Ω*2 BT Transmission Range Up to 10m Bluetooth V5.
AAVANTE BAR OCTAVE
