Installation Guide

INSTALLATION GUIDE AND MATERIALS GUIDE
Care & Maintenance
 Clean everyday by rinsing with mild soap and warm water and wipe dry
 Rub lightly with soft cloth in direction of grain lines on a regular basis for additional
preventative cleaning
 Keep the sink free of any standing water as this can cause buildup of mineral
deposits affecting the appearance of the sink
 Any stubborn stains should be removed by scrubbing in the direction of the grain
with mild abrasive cleaner
 Always rinse the sink after using any cleaning agent and wipe dry. Clean any
mineral deposits built up over time with a mild solution of vinegar and water
followed by flushing it well with water
 Remove any scratches with scotch-brite pad and cleaning agent rubbing in direction
of the grain
 Do not leave water spots, steel cookware or utensils in the sink for long periods of
time; iron particles can develop rust spots in stainless steel surfaces
 Do not use a steel wool or scouring pad as it damages the sink surface and causes
discoloration
 Do not let cleaning agents or bleach sit in your sink for long periods of time as this
will ruin the finish of the sink
 Do not leave rubber mats, sponges, or cleaning pads in the sink for long periods of
time as this may ruin the finish of the sink
 Do not use any drain cleaning products containing sulfuric acid or hydrochloric acid
as this will ruin the sink. Silver cleaners can also contain acids that will damage the
sink surface
 Do not use the sink as a cutting surface