Use and Care Manual

9
boannstyle.com
Installing the Feed Water Connector
2. After the cold water hose is detached, use the wrench to unscrew the cold water valve from
the cold feed water pipe.
3. Thoroughly attach the Manual Shut Off Valve to the Water Feed Connector with wrench.
Tighten the Water Feed Connector to the cold feed water pipe, followed by the connection of
the cold water valve onto the Feed Water Connector.
3. Reattach the cold water hose onto the cold water valve. Locate the red PE tubing and slide the
threaded nut onto one end of the red PE tubing and attach the tubing onto the Manual Shut Off
Valve. Screw the nut onto the Manual Shut Off Valve.
Installation Preparation
Turn Off Cold Water
Valve (Turn Clockwise)