Use and Care Manual

13
boannstyle.com
3. Adhere the gasket to the interior of the Discharge Water Drain Clamp. Now stick the black PE
tubing into the drain clamp, making sure the tubing is protruding through at least 1/2 inch.
4. Now rmly secure the Discharge Water Drain Clamp in its chosen location, making sure the
tubing is inserted into the drain pipe by 1/4 inch (as shown).
5. Assemble the two pieces of the Discharge Water Drain Clamp with use of the two screws and
bolts. Now attach the black PE tubing discharge line into the Drain input port on the rear of the
R.O. ltration system.
Assembled Discharge Drain Clamp Drain Input Port
R.O. Filtration System Installation