Use and Care Manual

12
boannstyle.com
Preparing the Discharge Water Drain Clamp
Find the location on the drain pipe under your sink where you wish to secure the Discharge
Water Drain Clamp. CAUTION: Make sure the location chosen is above the Trap. (The Trap is the
“U” shape part of the drain pipe) You may secure the saddle clamp on the horizontal pipe, as long
as the clamp is above the Trap. It is also advisable to secure the drain clamp in a location that it is
not blocking anything.
1. Drill out the chosen spot with a 1/4” drill bit. The 1/4” hole that is created into the chosen
location on the drain pipe is where the black discharge line will be inserted and secured
into place with the Discharge Water Drain Clamp.
2. Now take the rubber gasket that accompanied the Discharge Water Drain Clamp and remove
its paper backing.
R.O. Filtration System Installation
Turn Off Cold Water
Valve (Turn Clockwise)
Rubber Gasket
Drain Trap
Tip!
The material of the Discharge Water Drain Clamp is exible. If your drain is larger
than the circumference of the drain clamp, press the clamp rmly onto the drain in
order to catch the bolts on the opposite side. It is required only to tighten the bolts
where the gasket begins to compress against the drain pipe.