Instructions / Assembly

18
boannstyle.com
Testing the Water Filtration System
After letting the system operate for one (1) hour, turn On the ltration system faucet and let water
run from the faucet until the storage water tank is empty. Invariably at rst you will evaluate dark,
murky water coming from the faucet. This is normal and reects loose particulates and carbon
dust being ushed out from the system. Upon conclusion of emptying out the tank, water will
commence to trickle from the faucet, indicating the tank is empty. After this process, turn Off the
faucet and let the system ll with water. The system is now operational and thus will produce
clean, drinkable water.
This concludes the installation process and you may now start drinking puried water from the
Boann Reverse Osmosis 5-Stage Water Filtration System. Enjoy!
If you require further information and/or clarication regarding the installation process, please
feel free to contact Boann at: [e-mail].
Threaded Fittings
To prevent a leak on any threaded tting that screws into the
Reverse Osmosis 5-Stage Water Filtration System, please
employ Teon tape by way of wrapping the threads of the
various threaded ttings 5-7 times.
This preventative measure will assist in preventing potential
leaks from the threaded ttings throughout the R.O. ltration
system.
If there are signs of leakage from a 1/4” tube
inserted into a threaded tting, simply push and insert the threaded tting further. To facilitate
this process, use pliers and grab the tubing 1/2” from where the tube inserts into the threaded
tting. This will help avoid damaging the tubing which will be inserted into the threaded tting and
invariably prevent leakage from this location.
R.O. Filtration System Evaluation/Leak Prevention
Tip!
Maintaining the pre-lters of your system is key to ensure the ltration system
sustains integrity in both water quality production and longevity of its parts and
components. The pre-lters are the ltration systems rst line of defense and thus
paramount in promoting the maximum lifespan of the R.O. Membrane.
Note!
Alternatively, the Reverse Osmosis 5-Stage Water Filtration System can be ushed
by simultaneously allowing water to run through the system and letting the faucet
run for 1 hour. Upon conclusion, clean, drinkable water can be enjoyed.