Instructions / Assembly

17
boannstyle.com
Initiating the Water Filtration System
Opening All Water & System Valves
At this point, turn On all water and system valves to initiate the water ltration system. Proceed to
turn On the Hot and Cold water valves and the ltration system’s Tank Ball Valve, located atop of
the R.O. Pressure Storage Water Tank.
Flushing the Reverse Osmosis 5-Stage Water Filtration System
PLEASE NOTE: By turning the cold water shut off valve ON, water is effectively owing through
the system, thereby ushing the system of any and all loose particulates and carbon dust.
IMPORTANT: It is advisable to turn on the cold water tap on the kitchen faucet to make sure there
are no leaks anywhere within the plumbing system.
It is important to allow the water to run through the system for one (1) hour to initiate the Reverse
Osmosis process and ensure proper system ushing. In that the R.O. Membrane is lled with food
preservative for quality assurance, it is advisable to ush it out with water, along with the Post
Carbon Filter and the Water Storage Tank’s bladder before water consumption.
R.O. Filtration System Installation
Tank Ball Valve - Open
Hot Water Valve Cold Water Valve
Tank Ball Valve - Close
Turn Water Valve
Counter-Clockwise
to Turn On
Turn Water Valve
Counter-Clockwise
to Turn On