Installation Guide

6
Connect the line converter extension (1) to the line converter (2). As you insert the pull
out hose (3) through the hose holder (4), connect it to the line converter extension (1).
Remove the spring (1) from the plastic tube. Insert pull out hose (2) into one hole of the
hose holder (3). Attach one end cap with the at side facing the holder. Insert the pull
out hose (2) through the spring (1). Place the second end cap between the spring (1) and
the second hole of the hose holder (3).
Installation Instructions
Step 5
Step 6
3
1
3
2
1
4
2