Installation Guide

7
Connect the water hoses (1) onto the water valves (we recommend using plumbers tape
to prevent leakage). Turn on water valves.
The short water line is HOT (1) water, while the longer water line is COLD (2). Securely
attach both HOT (Red - 1) and COLD (Blue - 2) water hoses to the faucet. Attach the
weight (3) onto the pull out hose at your desired location. Note: The weight should NOT
make contact with the faucet line hoses when the faucet head is pulled out.
Installation Instructions
Step 7
Step 8
2
1
1
3
1
HOT COLD