Specifications

45
AT+BTAUTOCON=E,N,T
Description
Related settings for attempting to connect to a device that was connected
using “AT+CONNECT” Command
1) BT Device Link Loss Disconnected
2) Repeat connection setting when “AT+CONNECT” fails
Info
E = Enable
‘0’ or ‘1’
Other Value = Error
N = Retry Number
‘1’ ~ ‘50’
Other Value = Error
T = Retry Time
‘1’ ~ ‘180’ (Unit per 1sec)
Other Value = Error
Examples
(HOST→BT) : AT+BTAUTOCON=0,10,20
(BT→HOST) : OK
AT+BTAUTOCON?
Description
BT Auto Connection Setting values information
Examples
(HOST→BT) : AT+BTAUTOCON?
(BT→HOST) : +BTAUTOCON:0,10,20
(BT→HOST) : OK
AT+CONNECT
Description
BT attempts to connect with the last connected device (SPP Only)
- When BTAUTOCON is enabled, retry as much as set
Examples
(HOST→BT) : AT+CONNECT
(BT→HOST) : OK
(BT→HOST) : CONNECTED:1