User Manual

Chapter 3 Arbitrary Waveform Output RIGOL
User‟s Guide for DG5000
3-17
automatically use straight lines to connect point 1 (level is -2 V) with point 2
(level is 4 V), similarly, point 2 with point 4, point 4 with point 1.
3) After all the points are edited, press Return to return to the upper level menu,
then press Save to enter the file storage interface (refer to “Store and
Recall”) and save the edited waveform.
7. View the edited waveform.
3
6
12
2
4
μs
0
4
2
1
-2
V
X1,Y1
9
1
3
X2,Y2
Note: As can be seen from the above figure, the waveform editor will automatically
connect the last point to the voltage level of the first point to create a continuous
waveform.