User Manual

Chapter 3 Arbitrary Waveform Output RIGOL
User‟s Guide for DG5000
3-5
To Select Arbitrary Waveform
Press Arb, use to open the 2/2 menu page, and then press Select Wform to
select “Builtin”, “Stored Wforms” or “Volatile Wform” for arbitrary waveform output.
Built-In Waveform
10 kinds of built-in arbitrary waveforms are provided by DG5000, including DC, Sinc,
Exponential Rise, Exponential Fall, ECG, Gauss, Haversine, Lorentz, Pulse and Dual
Tones.
DC
DG5000 can output DC signal with amplitude ranging from -10 V to 10 V. The figure
below shows a DC waveform.
Sinc
The figure below shows a Sinc waveform.