User Manual

RIGOL Chapter 14 Appendix
User‟s Guide for DG5000
14-2
Appendix B: Specifications of Power Amplifier
Unless otherwise noted, all the specifications can be guaranteed if the following two
conditions are met.
 The generator has been working continuously for 30 minutes at specified
temperature.
 All the specifications are guaranteed unless those marked with “typical”.
Signal Input
Input Impedance
50k
Built-in Bias Voltage
(Output Equivalent)
+/-12V
External Input
+/-10Vmax (Gain: X1)
+/-1.25Vmax (Gain: X10)
Power Amplifier Specifications
Running Mode
Constant Voltage
Gain
Switch between 10V/1V and 10V/10V (DC Gain Error:
<5%)
Polarity Switch
Align/Invert
Effective Value of Sine
Output Power
( RL=7.5Ω)
10W (Typical Value, Input Sine, 100kHz, X10)
Output Voltage
12.5Vpeak (Input Sine, 100kHz)
Output Current
1.65Apeak (Input Sine, 100kHz)
Output Impedance
<2 Ohm
Full Power Bandwidth
DC~1MHz【Note 1】
Output Slew Rate
≥80V/µs (Typical)【Note 2】
Overshoot
<7%
Bias Voltage Specification
Bias Voltage Gain Error
5%± 100mV
Others
Power Supply
DC 12V± 5%, 4Apeak
Output Protection
Output Overcurrent Protection, Internal Temperature
Abnormity Protection
Operating Temperature
0 ℃～+35 ℃【Note 3】
Dimensions (W× H× D)
142.2mm× 48.1mm× 215.4mm