User Manual

RIGOL Chapter 10 Advanced Operation
User‟s Guide for DG5000
10-42
 Press ManualIP to select “On” or “Off” to turn ManualIP mode on or off. To
enable this mode, set DHCP and AutoIP as “Off”.
 The IP format is nnn.nnn.nnn.nnn. The first nnn ranges from 0 to 223
(except 127) and the other three nnn range from 0 to 255. We recommend
that users acquire an available IP from your network administrator.
 Press IP Address and use the numeric keyboard and direction keys to enter
your desired IP. The setting is stored in the non-volatile memory and will be
loaded automatically when the generator is powered on the next time if
DHCP and AutoIP are set as “Off”.
Tips
 If all the three IP configure modes are “On”, the priority of parameters
configuration from high to low is “DHCP”, “AutoIP” and “ManualIP”.
 The three IP configure modes cannot be set as “Off” at the same time.