User Manual

Chapter 9 Store and Recall RIGOL
User‟s Guide for DG5000
9-3
character (including number and underline) only. If you use other characters to name
the file and file holder, the Store and Recall interface could not display it normally.
To Select File Type
The status to be stored includes the waveform shape, frequency, amplitude, DC offset,
duty cycle, symmetry, phase of the two channels and any other parameters of Mod,
Sweep or Burst.
Press Store/Recall  File Type to select the desired file type. The file types
available include: State File, Arbwave File, Digital File, FH File and All File.
1. State File
Store the work state of the instrument (.RSF).
2. Arb wave File
Store the user-defined arbitrary waveform (.RAF). To edit arbitrary waveform data,
please refer to the introduction in the chapter “Arbitrary Waveform Output”.
3. Digital File
Store the user-defined digital waveform (.RDF). To edit digital waveform data, you
need to install the digital module option (DG-POD-A), and press Utility  Digital
 “Power On”  User*.
4. FH File
Store the user-defined frequency hopping file, including FH Map (.RHM), FH List
(.RHL) and FH Sequence (.RHS). To edit FH File, please refer to the introduction in
the chapter “FH Output (Option)”.
5. ALL File
Display all the files and folders in the currently selected directory.