Owner manual
Table Of Contents
- Parts List
- Specifications
- Basic Functions
- How You Will Use the Model 725
- Installing timerPRO Software
- Setting Up the Model 725
- Field Upgradeable Software
- Getting Help
- Back Panel Inputs and Outputs
- Front Panel Controls
- Main Screen
- General Settings
- Channel Properties Screen
- Quiescent States
- Logic
- Timing Modes
- “Apply” versus “Program All Channels”
- Fixed Output Mode
- Passive Mode (Output = Input)
- Clocked Pulse Stream Mode
- Delayed Pulse After Trigger Mode
- Important Delay Timing Considerations
- Validated Trigger Input Mode (Noise Suppression)
- Timer Mode
- Dynamically-Delayed Pulse Mode
- Toggled Output Mode
- Dynamic Delay Compensation Mode
- Storing and Recalling Experiment Files
- Front Panel Controls and Indicators
- Selecting a Channel from the Front Panel
- Performing a Front Panel Function
- Store/Recall Settings Profiles
32
100 (high res mode) 100/64 (low res mode)
Delay range
20 ns to 21.47 s 1.28 µs to 1374 s
Duration range
7.7 µs to 21.47 s 493 µs to 1374 s
Delay / Duration
resolution
10 ns 640 ns
Triggering
This tab lets you control how the channel will trigger:
Normal The channel can retrigger an unlimited number of times
Skip N triggers The channel triggers only after the specified number of input pulses
(between 0 and 2,147,483,647).
Retrigger N times Limits the number of retriggers allowed between resets (between 0
and 2,147,483,647). To allow a channel to be triggered again after