Manual

7
SECTION 1
SPECIFICATIONS
MODEL 106C/155/130 CHARACTERISTICS
Timing Characteristics
Rep Rate: 0 Hz-100 MHz
Width: 3 ns - 640 s (Pulse Mode); 3 ns (min.) at reduced
amplitude.
Impulses, fixed 400 ps fwhm (typical).
Input Characteristics
EXTERNAL DRIVE
Range: dc - 300 MHz (200 MHz for zero Baseline level):
specifications apply dc - 100 MHz.
Input Impedance: 50 ohms.
Minimum Signal Amplitude: 300 mV.
Maximum Signal Amplitude: ±7 V dc or 10 V ac p-p.
Minimum Width: 5 ns; 3 ns (min.) at reduced amplitude.
Threshold Range: ±2.5 V.
Threshold Resolution: 10 mV.
Insertion Delay: 5 ns, typical (between EXT DR and LIGHT OUT).
Jitter: 30 ps rms (between EXT DR and LIGHT OUT).
Connector: Threaded SMA (3 mm).
EXTERNAL MODE
Range: 100 Hz to 700 MHz (-3 dB).
Input Impedance: 50 ohms.
Sensitivity: 200 mV rms/mW, typical.
Maximum Signal Amplitude: ±2 V dc or 3 V ac p-p.
Total Harmonic Distortion: < 20 dB below fundamental (0.5 mW avg, level with
0.5 mW rms modulation).
Insertion Delay: 5 ns, typical (between EXT MOD and LIGHT OUT).
Connector: Threaded SMA (3 mm).