Technical data

these circumstances, headlight
beam throw has to be adjusted
to suit the weight carried by the
motorcycle.
Consult a specialist work-
shop, preferably an au-
thorised BMW Motorrad deal-
er, if you are unsure whether
the headlight basic setting is
correct.
Adjusting headlight beam
throw
Slacken screws 1 on left and
right.
Adjust beam throw by tilting
the headlight slightly about its
horizontal axis.
Tighten screws 1 on left and
right.
Beam-throw basic setting
Slacken screws 1 on left and
right.
Tilt the headlight slightly
about its horizontal axis until
arrowhead 2 is pointing toward
marker 3.
Tighten screws 1 on left and
right.
Seat
Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key to the left in seat
lock 1 and hold it in this pos-
ition while pressing down the
front part of the seat.
4
54
z Operation