Operation Manual

Turn adjusting screw 1
clockwise to increase the span
between the brake lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the brake
lever and the handlebar grip.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Shift mechanism
Adjusting shift lever
Slacken screw 1.
Turn peg 2 to the desired pos-
ition.
You might experience dif-
ficulties with gearshifts if
the peg is set either too high or
too low. Check the setting of the
peg if you experience gearshift
difficulties.
Tighten screw 1 to the spe-
cified tightening torque.
Eccentric, peg to shift
lever
8 Nm
Mirrors
Adjusting mirrors
Pivot the mirror to the correct
position by pressing gently at
the edge.
4
63
z Operation