Operation Manual

Push multi-controller 1 to the
right and hold it in this position
to reset the stopwatch.
Measuring travel times
Call up the Info menu and
select Travel times.
Push multi-controller 1 to the
right and hold it in this position
to reset the travel time.
Timing continues even if you
select some other reading or
switch off the ignition.
Time during which the mo-
torcycle was on the move
since the last reset.
Time during which the mo-
torcycle was at a standstill
since the last reset.
Odometer and
tripmeters
Selecting odometer
Switch on the ignition.
Press button 1 to select trip-
meter 2 of your choice.
The following counters can be
displayed:
Tripmeter 1 (Trip 1)
Tripmeter 2 (Trip 2)
Automatic trip meter (Trip A,
resets automatically eight hours
after ignition OFF)
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 1
until the tripmeter reading is
reset.
4
49
z Operation