Operation Manual

Reset! appears on the dis-
play press the multi-controller
to the right and hold in this po-
sition)
Use the multi-controller to se-
lect your preferred settings.
On-board computer
Selecting readings
Call up the Info menu and
select the item of information
of your choice.
The following items of informa-
tion can be displayed in panel 3:
ØConsump.1: Average
consumption 1
ØConsump.2: Average
consumption 2
Range: Range with fuel re-
maining in fuel tank
ØSpeed: Average speed
Temperature: Ambient
temperature
Tire pressure: Tyre
pressures
Stopwatch: Stopwatch
Travel times: Travel
times
Date: Current date
Oil level: Engine-oil level
Off: No reading
Resetting average values
Call up the Info menu and
select the average value you
want to reset.
Push the multi-controller to the
right and hold it in this position
until the average value is reset.
Operating stopwatch
Call up the Info menu and
select Stopwatch.
With the stopwatch stopped,
push multi-controller 1 to the
right to start the stopwatch.
The stopwatch continues tim-
ing even if you select some
other reading or switch off the
ignition.
With the stopwatch running,
push multi-controller 1 to the
right to stop the stopwatch.
4
48
z Operation