Operation Manual

workshop, preferably an author-
ised BMW Motorrad dealer.
Front light failure
General warning light shows
yellow.
Bulb symbol with arrow
pointing to the front ap-
pears on the display.
Possible cause:
Low-beam headlight, high-beam
headlight, parking light or front
flashing turn indicator defective.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer, if the low-
beam headlight or an LED turn
indicator requires replacement.
Replacing high-beam headlight
bulb ( 127).
Light failure
General warning light shows
yellow.
Bulb symbol with two ar-
rows appears on the dis-
play.
Possible cause:
A combination of light failures
has occurred.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Ice warning
The ice-crystal symbol ap-
pears on the display.
Possible cause:
The air temperature measured
at the motorcycle is lower than
3 °C.
The ice warning does not
mean that there is no risk
of black ice forming at measured
temperatures above 3 °C.
Always take extra care when
temperatures are low; remember
that the danger of black ice form-
ing is particularly high on bridges
and where the road is in shade.
Ride carefully and think well
ahead.
ABS self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
Self-diagnosis did not complete,
so the ABS function is not avail-
able. The motorcycle must be
ridden at a speed of at least
5 km/h in order for ABS self-dia-
gnosis to complete.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS warning light shows.
3
34
z Status indicators