Operation Manual

Installing battery
Place the battery in the battery
compartment, positive terminal
on the right in the forward dir-
ection of travel.
Install the retainer and install
screws 3.
Installation in the wrong
sequence increases the risk
of short-circuits.
Always proceed in the correct
sequence.
Connect battery positive lead 2
first and close the cover.
Then connect battery negative
lead 1.
Install the seat ( 107).
Switch on the ignition.
Set the time in Settings
- Time and set the date in
Settings - Date.
Fuses
Replacing fuses
Switch off the ignition.
Remove the seat. ( 105).
Risk of fire if an attempt is
made to jumper defective
fuse.
Always replace defective fuses
with new fuses of the correct
amperage rating.
Consult the fuse assignment
diagram and replace the de-
fective fuse.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Install the seat ( 107).
Fuse assignment
1 40 A
Motorcycle electronics
2 40 A
Motorcycle electronics
with Electronic Suspen-
sion Adjustment (ESA)
OE
ESA
8
133
z Maintenance