Operation Manual

Removing topcase
Use the ignition key to unlock
seat lock 1 and lift the rear of
the seat.
Disconnect plug 2 of the seat
heating and remove the seat.
Place the seat, upholstered
side down, on a clean surface.
Switch off the ignition.
Disconnect plug 1.
Work the topcase-end plug
through to the rear.
Open the topcase ( 104).
If applicable, empty the top-
case and lift out the bottom
mat.
Push slide latch 2 toward the
outside and hold it in this posi-
tion.
Turn rotary latch 3 clockwise
as far as it will go.
Release warning 4 is visible.
Close the topcase ( 104).
7
105
z Accessories