Operation Manual

"activation after ignition off" para-
meter is set.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customising anti-theft
alarm settings
with anti-theft alarm (DWA)
OE
Call up the Settings
menu and select Vehicle -
Alarm syst..
The following settings are avail-
able:
Automatic - On: Anti-
theft alarm is activated auto-
matically when the ignition is
switched off.
Automatic - Off: Anti-
theft alarm has to be activated
with the remote control when
the ignition is switched off.
Alarm tone: Type of alarm
tone.
Operat. tone - On:
Turn indicators flash and one
tone sounds as confirmation
when the alarm is switched on
or off.
Operat. tone - Off:
Turn indicators flash as only
confirmation when anti-theft
alarm is switched on or off.
Configure the desired settings
using the Multi-Controller.
Tyres
Checking tyre pressure
Incorrect tyre pressures im-
pair the motorcycle's hand-
ling characteristics and increase
the rate of tyre wear.
Always check that the tyre pres-
sures are correct.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check tyre pressures against
the data below.
Tyre pressure, front
2.9 bar (Tyre cold)
Tyre pressure, rear
2.9 bar (Tyre cold)
4
75
z Operation