Operation Manual

DTC warning light shows.
Possible cause:
The rider has switched off the
DTC system.
Switch on DTC.
DTC fault
with Dynamic Traction Control
(DTC)
OE
DTC warning light shows.
Possible cause:
The DTC control unit has detec-
ted a fault. The DTC function is
not available.
You can continue to ride. Bear
in mind that the DTC function
is not available. Bear in mind
the more detailed information
on situations that can lead to a
DTC fault ( 94).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Tyre pressure outside
permitted tolerance
with tyre pressure monitoring
(RDC)
OE
General warning light
flashes red.
+ The critical tyre pressure
shows red.
Possible cause:
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage
and to ascertain whether the
vehicle can be ridden with the
tyre in its present condition.
If the vehicle can be ridden with
the tyre in its present condition:
Out-of-tolerance tyre pres-
sures impair the motor-
cycle's handling characteristics.
Adapt your style of riding
accordingly.
Correct the tyre pressure at the
earliest possible opportunity.
Before you adjust tyre pres-
sure, read the information
on temperature compensation
and adjusting pressure in the
section entitled "Engineering
details".
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
If you are unsure whether the
vehicle can be ridden with the
tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.
3
36
z Status indicators