Operation Manual

Possible cause:
Self-diagnosis did not complete,
so the ABS function is not avail-
able. The motorcycle must be
ridden at a speed of at least
5 km/h in order for ABS self-dia-
gnosis to complete.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS warning light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride the
vehicle, but make due provi-
sion for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault ( 93).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
DTC intervention
with Dynamic Traction Control
(DTC)
OE
DTC warning light quick-
flashes.
The DTC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than DTC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
DTC self-diagnosis not
completed
with Dynamic Traction Control
(DTC)
OE
DTC warning light slow-
flashes.
Possible cause:
Self-diagnosis did not complete,
so the DTC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for DTC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the DTC function is not
available until self-diagnosis has
completed.
DTC switched off
with Dynamic Traction Control
(DTC)
OE
3
35
z Status indicators