Operation Manual

Then connect battery negative
lead 1.
Install the front seat ( 60).
Switch on the ignition.
Set the time in Settings
- Time and set the date in
Settings - Date.
Fuses
Replacing fuses
Switch off the ignition.
Remove the front seat. ( 60).
Any attempt to jumper a
defective fuse gives rise to
the risk of a short-circuit and fire.
Always replace a defective fuse
with a new fuse of the same
amperage.
Consult the fuse assignment
diagram and replace the de-
fective fuse.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Install the front seat ( 60).
Fuse assignment
1 40 A
Motorcycle electronics
2 40 A
Motorcycle electronics
with Electronic Suspen-
sion Adjustment (ESA)
OE
ESA
3 30 A
Engine electronics
4 fuse box open with fuses
assignment as follows:
-1 Not used
-2 Not used
-3 Not used
-4 4 A
Left handlebar fitting
with tyre pressure monit-
oring (RDC)
OE
RDC
with topcase
OA
Topcase light
-5 Not used
with preparation for audio
system and navigation
device
OE
7,5
Audio system
-6 4 A
Beam throw adjustment
with Adaptive Head-
light
OE
Adaptive cornering lights
8
137
z Maintenance