Operation Manual

switch back to stage one as soon
as the seat is warm.
2 Switch centred: Heating off.
3 One-dot section of switch
pressed: 50 % heating power.
4 Two-dot section of switch
pressed: 100 % heating
power.
Symbol 5 appears on the display,
indicating that the rear seat heat-
ing is ON.
If this warning symbol ap-
pears it tells you that the
on-board system voltage is low.
If applicable, the seat heating
might have been temporarily
switched off.
Dynamic Traction
Control DTC
with Dynamic Traction Control
(DTC)
OE
Switching DTC off and on
Switch on the ignition.
Call up the Settings menu
and select DTC.
This menu cannot be called
up while the motorcycle is
on the move.
Select Off (once) to
switch DTC off once, in other
words until the ignition is next
switched on.
The DTC warning light
shows to indicate that DTC
has been switched off.
Select On to switch on DTC.
Alternatively: Switch the igni-
tion off and then on.
DTC warning light goes
out; if self-diagnosis has not
completed the DTC warning light
starts flashing.
4
58
z Operation