Operation Manual

Installing rear wheel
Possible malfunctions when
ABS and DTC systems in-
tervene if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS and
DTC systems at the start of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Roll the rear wheel into position
at the rear-wheel adapter and
attach it.
Fit five bolts 1 and tighten to
the specified torque in diagon-
ally opposite sequence.
Rear wheel to wheel
flange
Tightening sequence:
tighten in diagonally
opposite sequence
60 Nm
Hold the number-plate carrier
in position.
Install screws 1 on left and
right.
Front-wheel stand
Installing front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
8
128
z Maintenance