Operation Manual

Press bulb 2 into its socket
and turn it clockwise to install.
Seat the glass in the turn indic-
ator housing.
Install screw 1.
LED rear light
If the number of LEDs in the rear
light that have failed exceeds the
number stated in the Technical
Data below, the rear light must
be replaced. Under these cir-
cumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Maximum number of de-
fective LEDs in rear-light
unit
1 (Brake/rear light (red))
1 (Number-plate light (white))
Jump-starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
A short-circuit can res-
ult if the crocodile clips
of the jump leads are accident-
ally brought into contact with the
motorcycle.
Use only jump leads fitted with
9
127
z Maintenance