Operation Manual

Remove screw 1.
Pull the bulb housing out of the
mirror housing at the threaded-
fastener side.
Remove the bulb holder 2 from
the bulb housing by turning it
counter-clockwise.
Remove bulb 3 from the bulb
holder.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
W16W / 12 V / 16 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Install bulb 3 in the bulb holder.
Turn bulb socket 2 clockwise
to install it in the bulb housing.
Seat the bulb housing in the
mirror shell.
9
125
z Maintenance