Operation Manual

Turn the end silencer to its
initial position.
Install screw 4 in the rear
footrest and tighten to the
specified tightening torque.
Silencer to rear footrest
22 Nm
Correct the clearance by turn-
ing the end silencer to the ap-
propriate position.
Clearance between silen-
cer and tyre
min 20 mm
Position the clamp as shown.
Tighten screw 3 of the ball-
joint clamp to the specified
tightening torque.
Silencer with ball-joint
clamp on manifold
35 Nm
9
118
z Maintenance