Operation Manual

Insert bulb 3 into the bulb
holder.
Turn the bulb socket clock-
wise to install it in the headlight
housing.
The headlight cable could
catch in the steering if it is
not routed correctly.
Use the appropriate retaining
clips to secure electric wires at
the back of the headlight.
Push the bulb housing into
mounts 4 on the frame.
Install securing screws 1 at
both sides of the bulb hous-
ing.
Replacing bulbs for front
and rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
8
108
z Maintenance