Operation Manual

on-board toolkit to turn adjust-
ing screw 1.
If you want a harder damping
characteristic, turn adjusting
screw 1 in the direction indic-
ated by the H arrow.
If you want a softer damping
characteristic, turn adjusting
screw 1 in the direction indic-
ated by the S arrow.
Basic setting of rear-
suspension damping
characteristic
without Electronic
Suspension Adjustment
(ESA II)
OE
Turn the adjusting screw as
far as it will go in the direction
indicated by the H arrow and
then turn it back one and a
half turns in the direction in-
dicated by the S arrow. (Full
load of fuel, with rider 85 kg)
Electronic Suspension
Adjustment ESA
With Electronic Suspension
Adjustment (ESA II)
OE
Settings
Electronic Suspension Adjust-
ment ESA provides a convenient
way of adapting the motorcycle
to the load it carries and the sur-
face over which you intend riding.
You have a choice of three load
modes with any of three damp-
ing variants selectable for each
mode.
The detailed description of the
ESA II Electronic Suspension
Adjustment system is on page
( 87).
Call up settings
Switch on the ignition.
Press button 1 to view the cur-
rent setting.
4
54
z Operation