Operation Manual

Raise the front wheel, insert
quick-release axle 3 and
tighten to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamping
screw 2 to the specified tight-
ening torque.
Clamping bolt in wheel
carrier
19 Nm
Remove the front-wheel stand.
without centre stand generation
II
OA
Remove the rear-wheel stand
Insert the ABS sensor into its
bore and install screw 1.
Ease the brake calipers on to
the brake discs.
Install securing screws 2 on
left and right and tighten to
specified tightening torque.
Front brake caliper to
wheel carrier
30 Nm
9
108
z Maintenance