Technical data

DTC self-diagnosis
completed
The DTC symbol no longer
shows.
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available or the function-
ality might be subject to certain
restrictions.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
Engine
Until the first inspection,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads.
Comply with the rpm limits for
running in.
The electronic engine man-
agement system prevents
the engine from revving past the
preset rpm limit for running in.
The authorised BMW Motorrad
dealer deactivates this monit-
oring function when the motor-
cycle is brought in for its initial
inspection.
Running-in speed
<7000 min
-1
(Odometer
reading 0...300 km)
<9000 min
-1
(Odometer
reading 300...1000 km)
Running-in speed
no full load (Odometer read-
ing 0...1000 km)
Do not omit the first inspection
after 500 - 1200 km.
Brake pads
New brake pads have to bed
down before they can achieve
their optimum friction levels. You
can compensate for this initial re-
duction in braking efficiency by
exerting greater pressure on the
levers.
New brake pads can extend
stopping distance by a sig-
nificant margin.
Apply the brakes in good time.
5
62
z Riding