Technical data

Applying light pressure from
behind, turn adjusting screw 1
to the desired position.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Adjustment options:
From position 1: widest span
between handlebar grip and
handbrake lever
To position 6: narrowest span
between handlebar grip and
handbrake lever
with Competition Kit
OE
Turn adjusting screw 2 in dir-
ection A to increase the dis-
tance between handlebar grip
and handbrake lever.
Turn adjusting screw 2 in dir-
ection B to decrease the dis-
tance between handlebar grip
and handbrake lever.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Adjusting footbrake lever
with Competition Kit
OE
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1.
Hold peg 2 in the desired posi-
tion and tighten screw 1 to the
specified tightening torque.
Peg on pedal
10 Nm
4
47
z Operation