Technical data

If the coding plug for the
SLICK function is not inserted,
you have the option of
switching the ignition off and
then on again.
An ABS fault has occurred
if the ABS warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Dynamic Traction
Control DTC
Deactivating the DTC
function
Switch on the ignition.
You have the option of de-
activating the DTC function
while the motorcycle is on the
move.
Press and hold down button 1
until DTC warning light 2
changes status.
DTC warning light starts to
show.
Release button 1 within two
seconds.
DTC warning light remains
ON.
The DTC function is deactiv-
ated.
Activating the DTC
function
Press and hold down button 1
until DTC warning light 2
changes status.
DTC warning light goes
out; if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
DTC warning light remains
off or continues to flash.
The DTC function is activated.
4
42
z Operation