Technical data

Press number-plate light bulb 1
into the light housing.
Fuses
Removing fuse
Any attempt to jumper a
defective fuse gives rise to
the risk of a short-circuit and fire.
Always replace a defective fuse
with a new fuse of the same
amperage.
Switch off the ignition.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Removing rear seat cover
( 52).
with Passenger Bundle
OE
Removing rear seat ( 53).
Squeeze the latches together
and remove cover of fuse
box 1.
To replace the main fuse, re-
move cover 2 of the relay box.
Use the tool from the on-board
toolkit to pull the defective fuse
up and out of the fuse box.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Installing fuse
Replace the defective fuse with
a fuse of the correct amperage
rating.
The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data". The figures in the
graphic correspond to the fuse
numbers.
Close the fuse cover.
9
154
z Maintenance