Technical data

levels to make the damping
"softer" or one of seven levels
to make the damping "harder".
Rebound and compression
damping can be altered on the
back wheel separately.
In order to be able to separately
customise rebound and com-
pression damping on the front
wheel, a height sensor must
be installed on the suspension
fork. A connecting plug for the
sensors is already present on the
motorcycle; it can be found un-
der the left side panel.
If an additional height sensor has
been installed, an existing sensor
replaced or the suspension
height changed, a calibration
must be performed. The
calibration is begun in SETUP
menu.
7
117
z Engineering details