Technical data

wheel from spinning whenever
possible.
The DDC system is set up for
reserved driving.
SPORT
The behaviour of the ABS is the
same as in RAIN mode.
The DTC system intervenes later
than in RAIN mode, so it is pos-
sible to induce slight drift when
exiting corners.
The behaviour of the DDC is the
same as in RAIN mode.
RACE
RACE is the sportiest mode
available without the coding plug
inserted.
In this mode, the ABS intervenes
later. It still prevents the wheels
from locking, but the function
that detects the tendency of
the rear wheel to lift clear of the
ground is deactivated. Under
these circumstances, the rear
wheel can lift off the ground.
Risk of rollover, because
the rear wheel lift-off pro-
tection system is switched off.
Be prepared during hard breaking
for the rear wheels to lift up off
the road surface.
The DTC system intervenes
even later than in the other
modes, so lengthy drifts and
wheelies are possible when
exiting corners (at angles of
inclination under 25°).
The DDC is set up for sporty
handling.
SLICK
The SLICK mode cannot be ac-
tivated unless the coding plug is
inserted.
The SLICK mode was developed
for situations in which the rider
has an open view of the road
ahead and the surroundings and
is riding on surfaces with the
high level of grip generally en-
countered only on race tracks.
Similarly, the assumption on
which the parameter settings for
this mode are based is that the
motorcycle is fitted with racing
slicks with a very high level of
dry-surface grip.
Engine power, power increase
and throttle response are all set
up for maximum sportiness.
The behaviour of the ABS sys-
tem in SLICK mode is derived
from the IDM. Furthermore, it dif-
fers from the RACE mode as the
ABS is not engaged when apply-
ing the foot brake pedal on the
rear wheel. Under these circum-
stances, the rear wheel can lock
up. The function for detecting
the rear wheel's tendency to lift
clear of the ground is also deac-
tivated.
Risk of rollover, because
the rear wheel lift-off pro-
tection system is switched off.
7
111
z Engineering details