Technical data

Use a small screwdriver to
push retainer 7 to the left and
at the same time push the plug
to the rear and off the anti-
theft alarm bracket.
Remove the anti-theft alarm
bracket.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.
Remove screws 8 with wash-
ers and remove the number-
plate carrier. Work the cable
through opening 9.
with Passenger Bundle
OE
Installing rear seat ( 54).
Installing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with Passenger Bundle
OE
Removing rear seat ( 53).
Hold the number-plate carrier
in position and work the cable
through opening 9.
Install screws 8 with the wash-
ers.
Close the plug, making sure
that retainer 2 engages, and
6
104
z On the race track