Technical data

In the multifunction display,
L-CON and the remaining
number of available starts 1
using Launchcontrol are shown.
Start with launch control possible.
Start as described below.
If no start using Launchcontrol is
currently possible, the number 0
is shown, alongside an exclama-
tion mark 2.
Allow the clutch to cool.
Cooling period for the
clutch
approx. 3 min (when the
engine is running)
approx. 20 min (when the
engine is not running)
When starting as normal, open
the throttle only as much as is
necessary to reach the speed
limitation.
After engaging the clutch, open
the throttle completely.
If the DTC warning light
shows, the DTC system
has been switched off.
Shift light on.
Launchcontrol controls the
ideal torque on the rear wheel
and maintains a constant
engine speed up to approx.
60 km/h.
The motor speed increases
due to full throttle acceleration,
once the speed limitation is
switched off.
6
101
z On the race track